Mod: Volvo Grumier
Ok, I can understand (but not approve) your line about dirt and specular. But in my opinion it comes as a need.
How can dirt or particles be handled in a mod where a single truck or trailer comes along with more than 400k polygons of wheels only?
The mod looks great. But totally unplayable except for photo purpose in a highly optimized game, with no other mods at all.
And it is a shame it is unplayable not only for who plays on a notebook, but for all not having a SLI GTX980 setup

Mod: MAN TGS Forst Set
The best wood combo in LS15 so far. I love it. Only a pair of minor suggestions.
First: what about removing minRot="1" and maxRot="359" from crane? It's easier to load the trailer if crane can move over it.
Last: what about a 6x6 traction?
Both modifications take max 30 sec on the xml and make it even better

Mod: Krampe 650 900 Mulde
kein MR daten, kein MR spezi, kein MR .i3d änderungen... Wo ist MR?

Mod: Moro RAPTOR QRV 20A
Superb mod, thanks!
Will be there a version with adjustable width and selection for the in-furrow plough mode? Or, if already implemented, how does it work?

Mod: Automizzatore
Das lustige ist dass die Beschreibung nicht korrekt ist auch auf Italienisch

Mod: Lexion 560 Montana und TT
Tip for the modder: Montana function works also laterally, but only in wrong direction
Replace:
if y_br > y_bl then
self.rotateValueB = y_br - y_bl;
else
self.rotateValueB = y_bl - y_br;
end;

self.rotateValueZ = self.rotateValueB*-0.1;

with:

self.rotateValueB = y_br - y_bl;
self.rotateValueZ = self.rotateValueB*0.1;

Anyway THANKS: this is the first really working released autoleveling

Mod: Fiat 1300DT
The mighty "Gold Stripe" series... Wonderful! Did anybody know that some John Deere, after seeing this series, asked Fiat to join her in a 50/50% joint venture?

Mod: Fendt 936 Vario SCR
Lob zu Surrealcrash für diese mod.

Und, jd8345r, bitte runterlade die Lego trekker von GiantsContest. Ein gut LS spieler wendet an MR ;-)

Mod: Holaras Pack
Nice pack... but the video makes me feel sick. One affected by epilepsy should be warned not to watch it...

Mod: Fendt Favorit 824
Lösung für exzessiv kraftstoffverbrauch mit MR:

In ploughingSpec.lua bitte löschen Zeilen zwischen 466 und 471 und kraftstoffverbrauch wird nun von MR verwaltet

Mod: Wildbach Tal
Sorry for english...don't speak german
I've noticed the problem with mapDoorTrigger and reported it in mapDoorTrigger post comments. If you quit a map without saving, then re-enter without exiting the game, mapDoorTrigger will duplicate the animation entries and hang. If you exit then re-enter the game, no problem. But if you save you will have DUPLICATED ENTRIES in mapDoorTriggers.xml and, if you don't remove them manually, doors will no longer work. Hope Vertex will read about it...

Mod: MapDoorTrigger
Hi all. Thanks for the mod!
FYI, didn't understand if it's due to my configbut two times, entering a saved game, I found the doors not showing the triggers. Investigating I discovered that if you enter a savegame, quit to main page without saving, then re-enter the same savegame, doors don't work. If in that situation you save game progress, you will find all the entries in mapDoorTriggers.xml duplicated

So, if doors don't open, clean duplicates in that file. And take the habit of either "save and exit" or completely quit the game before reloading a savegame

Mod: Feldbinder Guellezubinger
Good job BUT damaged by the front collision shape. If you turn too tight with the road tractor it jumps in air. AND you CAN'T attach a dolly because of the same collision. Otherwise, despite it's been presented at the same time with the Zubringer, it had its fashion...
Uh, another thing. Please... the SCALE... either this and the Kotte are 15-20% larger than reality

Mod: Ropa Euro Tiger Pack
I know they left it in the middle... for this reason I talked only about the mod without adding any other reference...

EIFOK people is lucky: they will win modcontest with their zunhammer only because this beast isn't in the match...

Mod: Ropa Euro Tiger Pack
We started previewing it in LS2009. Then first ingame videos in LS2011, now WE GOT IT !!!
Tried it now... and I'm speechless.
Thanks !

Mod: Annaburger HT
(in english) Because the "modder" isn't able to scale correctly the body and keep animation!!

Mod: Released 17.06.2013
Finally a well-scaled silage trailer. Super! Thanks

Mod: Brantner TA 11045 XXL
When parked outside of roads and concrete it falls through the ground. It's in fact missing the collisions!!

Apart for this "little" problem nice trailer!

Mod: Cat Challenger 765b
Collision problem: the 8 labels "polySurface1" are set as "Rigid body".

Remove those flags from "Rigid Body" and everything goes fine

Mod: BGA für Kleinbetriebe
Well, usually the pre-fermenter is used in the medium-large plants. The small ones (up to 80-100KWe, but in some cases also 200kwe) are set up with a single digester and, based on what you use to feed the digester, a big mixing basin (up to 200 cbm) if you use manure, or a Fliegl feeder if you go silage.

So, TyphoOn, it's absolutely correct like you made it

Mod: BGA für Kleinbetriebe
Very nice. I'm still missing a BGA in Wildbachtal. Hope K und S would have my same thoughts ;)

Keep up the good work TyphoOn, Thank you!

A hint: in small farm they throw all the solid manure in the BGA, then they get an "almost liquid" residual. So no solid manure in those farms...

Mod: Fendt Vario 724 SCR Standard Grün für LS13 von T.I.F und ModHoster-Teamwerkstatt
20 thousand downloads in 8 hours !!

Congratulations Ago, Congratulations MH Teamwerkstatt !!

Mod: Krassort Gülle Feldrandcontainer
sind Sie dass Sie nicht verstehen die sinn?

Der Mod funktioniert einwandfrei. Vorzuziehen die Spezialisierung die unter den genannten verwenden

Mod: FlieglTMK260
Ha ha... try to drive the first corner and you'll see it jumping in the air... try to back it up and see what the tractor does...
If it shows ingame, because the only "conversion" is about moddesc.xml...
Particlesystem, emissive billboards are still the FS2011 versions, so plenty of errors and stuttering. AVOID IT !!

Mod: Krassort Gülle Feldrandcontainer

die Füllung wird mit der abgesenkten Boden und auf der gegenüberliegenden Seite der Zugdeichsel gesteuert mit R taste (siehe bild http://images.modhoster.de/system/files/0033/3211/huge/krassort-gulle-feldrandcontainer.jpg)

Mod: Case Puma CVX 230
poor conversion?
Wrong power, powershaft+PTOOutputNode (duplicate), lights not transformed. But the model is very nice

Mod: Krassort Gülle Feldrandcontainer
Very nice. Only I found that the specialization manureTrailer.lua makes the sound not to stop after finishing the manure.
I've solved copying the function from the Gülletransporter semitrailer by Grafik-edv (thanks)

Mod: Perard 25To
Eng
I posted the solution in English below last November 13th. Posted in German november 20th.
If the creator doesn't fix it do it yourself and stop crying

Deu
Ich gepostet die Lösung in englischer Sprache unter letzten 13. November. Veröffentlicht in Deutsch 20. November.
Wenn der Ersteller nicht hilft, dann tun Sie es selbst und hör auf zu weinen

Mod: Perard 25To
See my previous posts...

Mod: Perard 25To
Sprechen Sie Englisch? Ich spreche kein Deutsch, aber ich versuche, um die Lösung mit Google Translate ubersetzt

Das Problem ist eine falsche Parameter in der Datei emissiveBillBoardShader.xml im zip enthalten.
Ersetzen Sie es mit der gleichen Akte aus dem Spiel Installationsordner kopiert. Alles geht gut so

Mod: Krone Emsland
I cannot understand what's the utility of having the specialization BeleuchtungV31 in moddesc if you don't add the lights in the .i3d ???

Mod: Perard 25To
[SOLUTION] For who experience game crash when buying Perard
The problem is a wrong parameter in the file emissiveBillBoardShader.xml contained in the zip.
Replace it with the same file copied from the game install folder. Everything goes fine then

Mod: New Holland T8 390
uber 10mb von "ÂÂ,ÂÂ" ist der problem...
Siehe linie no. 155034, 330588, 497899 von .i3d file mit ein text-editor

Bitte entschuldigen Sie, aber Ich weiß nicht Deutsch

Mod: New Holland T8 390
I found 3 errors in file .i3d: wrong character strings in these trianglesets' names:
"base direicao"
"vedasaum"
"cardam"
Every string is more than 2 million characters long
Solving these errors the .i3d file decreases to 35.7 mb

Then there are two "kennzeichen" in the rear part hitting ground. Thei must be heightened by 0.4 units

Then the rear right wheel is a bit lower than the rear left one so it tends to go on a side. Once solved this and some minor log callstacks (wrong indexes) it's a very enjoyable mod

Mod: Hawe ULW 3000T
Very nice model, I like it very much.
I found only one LITTLE problem: small combines cannot unload in this trailer because the exactFillRootNode is maybe a little too high.

For example the autoleveling Deutz 4080HTS can unload only in the first few centimeters due to that node shape being a bit lower in that area.

Thank you

Mod: Kverneland Großflächenwender
"Urmodder leider unbekannt"

XYZSpain "unbekannt" ?? wo du hier kommst ?

Mod: 8360R
It's a real SHAME that this model has been reduced. Before it WAS 1:1, now NO MORE...
For not informed:
JD 8520: height: 310.4 cm roof top See: http://manuals.deere.com/omview/OMAR178078_19/?tM=FR
Next:
JD8530: 305.3cm
Next:
JD8345R: 324.3cm roof top http://manuals.deere.com/omview/OMRE314070_39/?tM=FR
And ours:
JD8360R: 352cm top beacon (source: http://manuals.deere.com/omview/OMRE317040_19/?tM=FR)

Mod: Johndeeere_9400
In which garbage can did he find it? It's an era that Courseplay doesn't need the specialization in moddesc... Unusable...

Mod: Deutz-Fahr Topliner 4080 HTS Balance
Very nice mod, I like it very much, as I liked your 4090

In my first night combining I found an error (also on the 4090) and I want to let you know:
Combine: back light (red) material red_diffuse is defined with "texture" instead of "emissivemap" so in the night they become invisible
Trailer: either the problem of the combine (not for bremslicht) and a double "visibility" check missing (the two "g0" of the lights)